Skip to content

Ask a question

What are you looking for?

Show the finished interior from an angle, where the gold trim and clean routing both stay visible.

All-ROG 20th Anniversary Build: Cable Routing in the GR701 Hyperion

A full-ROG build in the GR701 Hyperion with a 9950X3D, RTX 5090 Astral, and hand-routed sleeved cabling. See the gold-accented result and the full parts list.

Lotoo PAW S3 and Audiora Cantabile: HiFi Pairing Review Reading All-ROG 20th Anniversary Build: Cable Routing in the GR701 Hyperion 4 min read Next Cool-Tone Minimalist Desk Setup: Quiet Grays and Evening Ambient Light

ROG gear has a way of looking good on a spec sheet and even better on a desk. This build goes all-in on the Republic of Gamers look: an ROG GR701 Hyperion chassis dressed in the black-and-gold 20th anniversary treatment, a Ryzen 9 9950X3D and RTX 5090 Astral inside, and custom-sleeved cables routed by hand. The question the photos really want to answer: how's the cable work? Judge for yourself.

The Chassis and the 20th Anniversary Dress-Up

Show the finished interior from an angle, where the gold trim and clean routing both stay visible.
Fig. 1. Show the finished interior from an angle, where the gold trim and clean routing both stay visible.
Open both tempered panels to give the anniversary-themed GR701 its full silhouette.
Fig. 2. Open both tempered panels to give the anniversary-themed GR701 its full silhouette.
Frame the case head-on so the shroud graphics and fan glow read as one design.
Fig. 3. Frame the case head-on so the shroud graphics and fan glow read as one design.

The foundation is the ASUS ROG GR701 Hyperion in black, the dual USB-C optimized version. Gold accents on the carry handle, the shroud plate, and the open tempered-glass panels give the case a striking anniversary look, with "20 ROG FUTURE" graphics and the ROG eye emblem worked into the layout. A five-piece custom light-board set made for the GR701 fills the shroud area, and the Lian Li Uni Fan TL FLEX rings echo the gold-orange glow around them.

Inside: AIO Screen, Fans, and the Dark Hero Board

Zoom in on the pump block and memory, where the gold-orange lighting is at its densest.
Fig. 4. Zoom in on the pump block and memory, where the gold-orange lighting is at its densest.
Highlight the 20th anniversary shroud plate that anchors the build's theme.
Fig. 5. Highlight the 20th anniversary shroud plate that anchors the build's theme.
Show the Lian Li TL FLEX fans and their ring lighting packed around the radiator.
Fig. 6. Show the Lian Li TL FLEX fans and their ring lighting packed around the radiator.
Let the Ryuo IV curved screen and Dark Hero board share the frame for a proper close-up.
Fig. 7. Let the Ryuo IV curved screen and Dark Hero board share the frame for a proper close-up.

Cooling is handled by the ROG Ryuo IV 360 ARGB with its 6.67-inch curved screen, which here plays a ROG 20th anniversary animation above the board. Memory is G.Skill Royal Trident RGB 96GB (2x48GB) DDR5-6000 C28 M-die running EXPO, in silver. Storage is a Samsung 9100 PRO 4TB NVMe PCIe 5.0 M.2. Fan duty falls to ten Lian Li TL FLEX 120 wireless units: six standard black reverse-blade... actually six standard-blade fans plus one LCD version with standard blades and three LCD versions with reverse blades, tied together through a Lian Li 2.4GHz wireless controller. The ROG XH01 Hercules ARGB GPU stand props up the Astral RTX 5090.

The Cable Routing, Up Close

Judge the cable routing here: sleeved modular lines swept flat against the back panel.
Fig. 8. Judge the cable routing here: sleeved modular lines swept flat against the back panel.

This is the part worth scrutinizing. Behind the motherboard tray, the custom-sleeved black-and-yellow modular cables sweep through in broad, even arcs, held in line with a cable management board, combs, and a hand-finished routing job. Power comes from the ROG Thor III 1200W GaN platinum unit (ATX 3, magnetic OLED panel), so there's plenty of headroom for the 5090 and the cabling discipline to match. From the front, almost nothing shows but the components and the glow.

Editor's Notes & Summary

An all-ROG platform, one anniversary-themed case, and hand-routed sleeved cables - the kind of build where the wiring deserves its own photos. The complete parts list:

Part Details
CPU AMD Ryzen 9 9950X3D, dual X3D, 208MB cache, 16C/32T, retail boxed (CN)
Motherboard ASUS ROG CROSSHAIR X870E DARK HERO
Memory G.Skill Royal Trident RGB 96GB (48x2) 6000 C28 M-die EXPO kit, silver
SSD Samsung 9100 PRO 4TB NVMe PCIe 5.0 M.2
GPU ASUS ROG ASTRAL RTX5090-O32G-GAMING, full-power overseas version
Case ASUS ROG GR701 Hyperion, black, dual USB-C optimized version
PSU ASUS ROG Thor III 1200W GaN, balanced-line version, Platinum, ATX 3, magnetic OLED screen
AIO ASUS ROG Ryuo IV SLC 360 ARGB, 6.67" curved screen, black
Fans Lian Li TL FLEX 120 wireless, black, standard blades x6
Fans Lian Li TL FLEX LCD 120 wireless, black, standard blades x1
Fans Lian Li TL FLEX LCD 120 wireless, black, RS reverse blades x3
Other Lian Li 2.4GHz wireless controller, black
Other GR701 custom light-board 5-piece set
Other Custom sleeved modular cables + cable management board + combs, hand-routed
Other ASUS ROG XH01 Hercules ARGB GPU support bracket, black
Peripherals ASUS ROG Azoth Extreme SE NX snow switch, 75% layout, 8K tri-mode, OLED touchscreen
Peripherals ASUS ROG Gladius III Ace Extreme, carbon fiber, 47g lightweight, wireless 8K tri-mode
Peripherals ASUS ROG Delta 2 wireless tri-mode headset, night black

1 comment
  • Who left my Xiaomi sitting on the desk?

     Daniel Foster

Leave a comment

Continue reading

Desk Setup Lab

Your daily source for desk setup ideas, gear reviews, and workspace inspiration.

English
  • English
  • русский
BlogCartWishlist