Skip to content

Ask a question

What are you looking for?

NOOIR K2 (Klavier II) Keyboard Preview: WING 2.0 Magnetic Suspension

NOOIR K2 (Klavier II) Keyboard Preview: WING 2.0 Magnetic Suspension

A first look at the NOOIR K2 Klavier II: a 65% aluminum keyboard with WING 2.0 magnetic suspension, tool-free lid, piano styling, and pre-sale pricing.

TRYX FLOVA Case Review: A Fabric-Wrapped 2026 PC Build with Full Parts List Reading NOOIR K2 (Klavier II) Keyboard Preview: WING 2.0 Magnetic Suspension 5 min read Next My Immersive Work-From-Home Desk: A 2㎡ Corner for Work and Gaming

The K2 picks up where NOOIR's piano-themed Klavier left off, and they're now showing the White Veil prototype ahead of its launch. It's a 65% kit with an integrated wrist rest, built around the WING 2.0 magnetic suspension system. Right now, you can only grab one through pre-sale — the Kickstarter wrapped on May 22, 2026, there's a ClickClack extension running until June 10, 2026, and it ships in Q4 2026. Since units haven't hit hands yet, what you're getting here is a design and build breakdown, not long-term real-world impressions.

A Lid That Opens Like a Grand Piano

Open the magnetic lid to expose the full switch deck and linkage without touching a screwdriver.
Fig. 1. Magnetic lid flips open — no screwdriver needed.
Lift the cover and pull the caps to see the bare tray, ribbon cable, and module rails inside.
Fig. 2. Inner tray with ribbon cable and module rails exposed.
Flip the top open for tool-free access to the WING 2.0 structure and engraved internal plate.
Fig. 3. WING 2.0 structure and engraved plate underneath the deck.

Here's the thing — the lid is magnetically attached and flips open just like a grand piano lid, propped on an angled frame with a thin red line running along its edge. No unscrewing, no fiddling. Pop it up and the entire internal linkage is right there. Want to tweak the mechanism, swap switches, or dust things out? You don't need a single tool.

Once you pull the switches and caps, the bare tray shows you exactly how the ribbon cable and module rails sit in there. The engraved plate underneath adds this nice piano-reference detail. The whole thing is designed to be looked at, not hidden away.

Piano Language in Machined Metal

Note the closed profile: 65% layout, integrated wrist rest, and the signature red line up front.
Fig. 4. Closed profile with integrated wrist rest and signature red line.
Check the glossy piano-key caps and the Klavier II signature etched into the front bezel.
Fig. 5. Piano-key keycaps and Klavier II signature on the front bezel.
Look through the glass side window to see the red accent and exposed internal structure.
Fig. 6. Glass side window showing the red accent and interior layout.
Study the milled triangle patterns and rubber foot that carry the design into the base.
Fig. 7. CNC-milled triangle patterns and sculptured rubber feet.
See how the CNC-milled underside keeps the angular piano theme running through the chassis.
Fig. 8. Milled underside continues the angular design language.

When it's closed, the K2 sits there as this sleek wedge of metal. The whole thing is cut from 6063 aluminum and 304 stainless steel with a 220-grit zirconia finish — it weighs over 4 kilograms, and the shipping box is apparently bigger than the N1's. The front keeps that signature red line and a linear array that nods to piano strings. There's also this thickened glass side window showing off what's underneath.

The keycaps stick with the theme — black-and-white piano-key layout in a glossy "Pianist" set — and the Klavier II signature is etched right into the front bezel. Two versions are planned: the White Veil goes with a sparkled coating meant to feel like a wedding dress (though heads up, this finish is softer than standard anodizing and scratches more easily), while the Nocturne edition pulls from 18th–19th century classical pianos with gold engraving. Underneath, those milled triangular cutouts and sculpted feet carry the same angular vibe through the whole base.

WING 2.0, Pricing, and What You Should Know

Spot the engraved NOOIR logo and port cutout finished into the brushed aluminum edge.
Fig. 9. Engraved NOOIR logo on brushed aluminum edge.
Raise the inner stack to see how the layers separate for cleaning, tuning, and switch swaps.
Fig. 10. Modular layers separate for cleaning and tuning.

WING 2.0 is the whole pitch here. Instead of the K1's single WING frame, the K2 breaks it down into eight independent modules — roughly 27 parts each — with wave springs and side rails keeping everything moving in sync so you get consistent feel across the board. The threaded posts let you adjust the gap between the repelling magnets, which gives you continuous force adjustment at about 0.1N per turn. No more soft-medium-hard presets. You can tune each of the eight zones independently too, which means dialing in different fingers however you like.

You get tri-mode connectivity (2.4G, Bluetooth, USB-C), VIA support, hot-swappable switches, a dedicated "Star Year Amber" switch, and layered foam to keep resonance in check.

But here's the reality check. The kit runs 6,666 RMB (~$916) for White Veil and 8,888 RMB (~$1,223) for the limited Nocturne edition — only 199 of those worldwide — and that's before you add switches and keycaps. A complete build gets close to 10,000 RMB. The predecessor N1 caught heat for anodizing and finish quality at similar prices, so the real question is whether K2's tighter tolerances mean better QC or not. The 65% layout with a fixed wrist rest isn't portable, and if you're into soft, bouncy gasket builds, this structure-focused design might feel too firm. Most of the coverage floating around right now is sponsored content, so honest feedback won't really surface until Q4 when units actually ship.

Editor's Notes & Summary

The K2 is for people who care about design, build, and collectability — not just keystroke efficiency. The zoned, continuously adjustable magnetic suspension and tool-free flip lid don't really have a match in mass-market or custom keyboards. If raw typing feel is all you care about, that same budget gets you several top gasket kits with money left over.


10 comments
  • Beautiful.

     Chris Bennett

  • Pinging!

     Leo Martin

  • Conservatively 6-7k, pricier than Angry Miao.

     Taylor Brooks

  • The official group buy hasn’t started yet.

     Avery Mitchell

  • Didn’t the group buy already end?

     Jordan Lee

  • NOOIR (author) 03-17, Guangdong, 1 reply

     Daniel Foster

  • This is way too cool.

     Ethan Parker

  • Is it the size or the price you’re asking about?

     Emma Clarke

  • How tall is the keyboard with the wrist rest attached? It looks pretty tall.

     Nora Hayes

  • Six or seven thousand yuan?

     Alex Morgan

Leave a comment

Continue reading

Desk Setup Lab

Your daily source for desk setup ideas, gear reviews, and workspace inspiration.

English
  • English
  • français
  • Español
  • 繁體中文
  • Deutsch
  • 한국어
  • 日本語
  • Suomi
  • Italiano
  • svenska
  • português (Portugal)
  • العربية
  • Norsk (bokmål)
  • русский
BlogCartWishlist