跳至內容

提出問題

What are you looking for?

Cooler Master NR200P V3 Build: Fitting an ROG RTX 5080 Into ITX

Cooler Master NR200P V3 組裝:將 ROG RTX 5080 塞進 ITX

Cooler Master NR200P V3 組裝的完整 ITX 零件拆解,搭配 ROG RTX 5080 OC、Ryzen 9 CPU 與 Thermalright 散熱。所有元件皆列出。

怒喵 NEON80 評測:搭配白色霧面鍵帽的柔和詮釋 正在閱讀 Cooler Master NR200P V3 組裝:將 ROG RTX 5080 塞進 ITX 閱讀時間:約 1 分鐘 下一篇 從衣櫃中鑿出的 4㎡ 書房:格局、尺寸與光線

旗艦顯卡、白金認證的 SFX-L 電源供應器,以及一顆 Ryzen 9 CPU——全部塞進一個小到能放在桌上喇叭旁的機箱。這就是這套組裝背後的構想,核心是 Cooler Master NR200P V3。這款機箱鎖定的是想兼顧效能與美感、又不想用全塔機箱的創作者、玩家與 PC DIY 組裝者,而這套配置正好把這項說法放上相當嚴苛的考驗:ROG Astral RTX 5080 OC 是市面上最厚實的顯卡之一。完整零件清單在文末。

為更大的旗艦顯卡而生

Park the finished NR200P V3 build on the desk and let the ROG Astral fans show through the front.
圖 1。把組裝完成的 NR200P V3 擺在桌上,讓 ROG Astral 的風扇從前方透出來。
See how the mesh front panel exposes the GPU fans for direct airflow.
圖 2。看看網孔前面板如何讓顯卡風扇直接進風。
Check the rear I/O, PCIe cutouts, and venting before routing cables.
圖 3。在走線之前,先檢查後方 I/O、PCIe 開孔與散熱孔。

NR200P V3 在設計時便考量到 NVIDIA 的 50 系列顯卡。隨著旗艦卡不斷變大,Cooler Master 加深了機箱的風道、加入原生 PCIe 5.0 延長線,並在整個機殼採用更高級的材料。

親眼所見(嗯,是照片上),最先注意到的是前方網孔面板。它讓 ROG Astral 顯卡的三顆風扇直接從機箱前方吸氣,而深色、方正的外型輪廓,讓整體看起來是有意為之,而非勉強塞入。對 ITX 主機板來說,後方 I/O 相當密集:USB、音訊與電源插孔全都沿著後緣排列,PCIe 開孔與散熱孔就緊鄰其旁。

裡面裝了什麼

Open the side panel to see the ITX interior and cable routing channels.
圖 4。打開側板,看看 ITX 內部與走線通道。
Fit the triple-fan ROG RTX 5080 with top exhaust fans just above it.
圖 5。裝上三風扇的 ROG RTX 5080,正上方就是頂部排風扇。

拆下側板,內部配置正是 ITX 組裝者所熟悉的樣子:Maxsun ESPORT B850I WIFI ICE 迷你 ITX 主機板位於畫面中央,走線通道與開孔讓線材不至於吞掉可用的空間。

散熱配置是 CPU 上的 Thermalright AXP120-X67 BLACK ARGB 下吹式散熱器,搭配 Thermalright TL-B12015 EX 與 Lian Li 風扇。頂部排風扇就位於顯卡正上方,三風扇的 ROG Astral RTX 5080 OC 填滿顯卡槽位,還留有一點餘裕。電力來自 ROG LOKI SFX-L 850W 白金電源——在這麼小的機箱裡,SFX-L 的尺寸很關鍵——記憶體則是 32GB 的 Asgard Thor 6000 C28 套件。

它在桌上的姿態

Keep the RGB glow subtle behind the mesh so the case blends into the desk.
圖 6。讓 RGB 微光含蓄地從網孔後透出,機箱便能融入桌面。
Leave the top mesh panel clear for the down-draft cooler's exhaust.
圖 7。讓頂部網孔面板保持暢通,供下吹式散熱器排風。

完成組裝後,這款機箱稱職地成為桌上的物件。它立在一對書架喇叭旁,前方網孔因內部 RGB 硬體而隱約發光,頂部網孔面板則讓散熱器的排風路徑保持暢通。沒有任何東西喧賓奪主。它看起來像是整套配置的一部分,而不是被流放到地板的塔式機箱。

編者註 & 摘要

一套精巧的 ITX 組裝,將旗艦 50 系列顯卡與小型化散熱及電力搭配,全部收納於 NR200P V3 之中。完整配置如下:

元件 零件
CPU AMD Ryzen 9 9700X
機箱 Cooler Master NR200P V3
散熱器 Thermalright AXP120-X67 BLACK ARGB
風扇 Thermalright TL-B12015 EX & Lian Li
記憶體 Asgard Thor 6000 C28 32GB
主機板 Maxsun ESPORT B850I WIFI ICE
電源供應器 ROG LOKI SFX-L 850W Platinum
顯卡 ROG ASTRAL RTX 5080 OC

10 則留言
  • When’s the new model coming? Any chance you could also make a 280 AIO?

     Mia Cooper

  • How much?

     Jordan Lee

  • Doesn’t the AXP120-X67 down-draft cooler run hot?

     Ethan Parker

  • Running a 240 AIO with a 7800X3D here. Couldn’t add bottom fans without removing the dust filter—cooling is honestly just average. PUBG easily hits 80°C, but other games are fine.

     Emma Clarke

  • No.

     Olivia Reed

  • Does the GPU make noticeable wind-cutting noise with the mesh side panel on, since it sits so close to it?

     Alex Morgan

  • Definitely louder than Noctua, but capping the fan speed works well.

     Liam Carter

  • Quick question—is the TL-B12015 EX loud?

     Taylor Brooks

  • This series should be getting updated new models this year.

     Avery Mitchell

  • Even with a 7800X3D, whatever cooler you use, temps still sit at 80+.

     Daniel Foster

留下評論

繼續閱讀

桌面佈置實驗室

您每日的書桌佈置靈感、裝備評論與工作空間啟發來源。

繁體中文
  • English
  • français
  • Español
  • 繁體中文
  • Deutsch
  • 한국어
  • 日本語
  • Suomi
  • Italiano
  • svenska
  • português (Portugal)
  • العربية
  • Norsk (bokmål)
  • русский
部落格購物車願望清單